Oki new thermal clamp nozzle for the rework of the stacked packaged devices

OK International AD603AR has introduced a precision rework tool for advanced packaging parts and assembly components - thermal clamp nozzle. New hot tongs nozzle can reduce the thermal stress, the stacked package (POP package) components imposed on the PCB during multiple rework operations than traditional hot air nozzle and the vacuum nozzle, new tools can significantly improve performance , coupled with the traditional tools are not suitable for multiple stacked together parts, the dome package chip, or easily damaged due to overheating, a small device. Stack welding point range, the thermal clamp nozzle enables the heat limitations, so they can prevent the entire PCB reaches the reflow temperature. But also a good alternative to the vacuum nozzle can be used to remove the dome package chips, or in repairing ball melt and produce a larger surface tension BGA package. The new thermal clamp MAX1473EUI nozzle can easily remove small components and connectors, especially those parts of the plastic shell. Repairing equipment (such as hot air tools) are easily damaged parts of the shell due to the Shi excessive heat or loss of control. Parts around often hot FT232RL wind off. PCB pads are usually in the manual disassembly with hand-held thermal clamp damage. On the contrary, the hot pliers nozzle to precisely control the heat, to welding and demolition parts at one go. OK Internationals thermal clamp Xizui work temperature of about 200 ℃, and the heating and combined from the demolition of components on the board action. Its jaws mounted on the reflow nozzle in the hot air heated to about 200 ℃, curved inwards, in order to grip the parts need to be removed. AD8369ARUZ Once the solder melts, the parts will be able to remove the heat clamp nozzle. Thermal clamp the nozzle design and rework equipment (heating nozzle OKi the APR-5000 Array Package Rework System) used in conjunction. Source: Electronic Engineering Times

RFMDs GSM / GPRS Power Amplifier RF3198 for dual-band mobile phone

RFMicroDevices (RFMD) has released the RF3198 dual-band power amplifier (PA) module. RF3198PowerStarPA module for dual-band mobile phone manufacturer, simple to build and optimize performance for entry-level and CLC014AJE to create alternative demand growing market. The RF3198 expansion of RFMDs power amplifiers product portfolio, and represents the latest generation of RFMD Department of PowerStar power amplifier products. The RF3198 of complement the company has recently launched on 3GSMWorldCongress the PA products, lock AD654JR the main growth area of ​​the cellular phone market, including entry-level and alternative phone, GSM / EDGE handsets and 3G multi-module mobile phone. The cellular phone market is the worlds largest consumer electronics market, about 2006 shipped nearly 10 million units. Characteristics of RF3198 coupled change compartment, harmonic performance and cross-band (cross-band), low RF complexity, and increase with the antenna and converter to select the design activity. In addition, these changed functions simplify calibration and increase the manufacturers ADS7809U production capacity, so you can accelerate time to market and low total cost of ownership. RF3198 RFMDs RF3146 Department of PowerStarPA module pin-compatible, field-proven standard products provided by the company for entry-level and alternative mobile phone market. RF3198 using a low-cost 7 × 7 × 0.9mm DS1210S package, and RoHS compliant. Purchased from one million units, priced at $ 0.98. Source: International Electronic Business

Keithleys ACS integrated test systems help semiconductor manufacturing

Instruments of measurement needs solutions companies Keithley (Keithley), recently released ACS (Automated Characterization Suite) Automated Characterization Suite integrated test systems. The test ADS7831U system at the device, wafer-level and black box level semiconductor characterization analysis. ACS test system through a unified software suite, providing faster measurement speed and greater system flexibility to meet the users unique test application needs. Unified Automated Characterization Suite, Keithleys ACS integrated test systems integrate a variety of test hardware, comprehensive and unique IR2132S measurement capabilities: Keithleys powerful Model 4200-SCS Semiconductor Characterization System IV source-measure capabilities and professional pulse test kit, for example, testing of advanced semiconductor materials 4200-PIV toolkit. Series 2600 System SourceMeter tester with TSP-Link MAX125CEAX+T and Test Script Processor (TSP), scalable IV channel system, high-speed NBTI testing, or wafer level device characterization and other applications in the operating conditions for parallel measurement and the complexity of the test sequence. Series 2400 SourceMeter tester can provide high voltage and high current source, can be used for high power MOSFETs and display drive testing. In addition, ACS integrated test systems also provide users with the choice of switch, C table, CS5532-ASZ and the pulse generator and other accessories. ACS integrated test systems have two types of configurations: basic desktop configuration, and for the production environment integrated full height rack configurations. Source: Electronic Engineering Times

in Dallas secure battery-backup products DS3641 with a piece NV SRAM

a wholly owned subsidiary of Maxim Integrated Products AD604ARZ has Dallas Semiconductor introduced the DS3641 battery backup controller, the device can provide comprehensive data protection IC for e-sale terminal and other applications with sensitive data. To improve security, the controller real-time clock (RTC), an automatic battery switch, and 4-wire interface integrated into a CSBGA package provides active tamper detection and rapid erasure of key memory. Due to the high level of security, The DS3641 not only supports FIPS 140 security levels 3 and 4, but also meets the Common Criteria, the highest requirements of the PCI-PED and EMV-4.1 certification organizations. The DS3641s most innovative feature is its proprietary on-chip nonvolatile SRAM, the SRAM used to hold the key. This memory architecture to eliminate the possibility of memory imprinting of the oxidation on MLT04GS the SRAM cell. Therefore, this technique prevents the passive residual data in the memory cell. Another innovation of the memory architecture is the DS3641 tamper alarm, all of its the 1kB storage array can be cleared in less than 100ns. Data erase operation is so fast, memory, high-speed hardwired clearing function and on-chip power supply to ensure active erasure. DS3641 battery backup controller provides a tamper-detection inputs can be connected to the system voltages, AD7888AR resistive meshes, external sensors, and digital interlocks and components continued to be low-power monitoring. Device monitoring, real-time clock (RTC) crystal oscillator, if the door of the oscillator frequency is lower than the set limit, and will invoke a tamper response. The internal digital temperature sensor MAX807NCWE with programmable rate of temperature change detector, in order to protect the devices encryption key memory from thermal attacks. In addition, DS3641 constantly monitors the main power when the power failure will automatically switch to an external battery power in order to ensure the normal work of the SRAM, RTC, and tamper detection circuitry. The DS3641 is specified over the temperature range of -40 ℃ to +85 ℃. Source: International Electronic Business

eastern China are being developed to become the worlds exports of electronic components

eastern China to the Yangtze River Delta is famous for her, including Shanghai, Jiangsu and Zhejiang provinces, area and population, respectively, accounted for 1% and 5.8% of this country. However, this region in 2002 to create the gross domestic product (GDP) reached 1.9105 trillion yuan (equivalent to U.S. $ 230.07 billion), accounting for 18.5% of the total value of the country in this country; at the same time, the introduction of foreign investment contracts amounted to U.S. $ 150 billion. In the past few years, Shanghai has also tried to developing a world-class economic, financial and trade center. At the same time, Jiangsu Province and Zhejiang Province as an international manufacturing center. Therefore, in the past few years, the region has witnessed the rapid growth of the mainland of China and the largest economy of scale. At the same time, during this period, the region of the electronic components industry experienced rapid development stage. The large export volume of the region in particular shows the tremendous prosperity of the region, the electronic components industry, which also contributed to Chinas eastern region to become the worlds components export base. Now, the regions thousands of private or foreign exporters of electronic components in the IC, capacitors, electro-acoustic components, AD604ARZ magnetic materials, micro-motors, connectors, PCB board, switches, transformers, relays, resistors, inductors such as the manufacture of electronic components. Manufacturer of electronic components 100, 43 settled in the eastern part of China. In the top ten manufacturers, there are seven in Zhejiang Province, Shanghai and Jiangsu Province. In addition, as Chinas return to the WTO, more and more multinational electronics and joint venture companies stationed in the region in the next few years, the eastern part of China in the world in the field of electronic components play a more an increasingly important role. At the same time, the microelectronics industry and optoelectronics industry will continue to cause great attention of the manufacturers and the authorities of the region, which will also be a major factor to stimulate export growth of the local electronic components industry. Therefore, most of the Yangtze River Delta, electronic components exporters will experience a 10% annual growth rate in the coming years with confidence. According to the statistics of the China Electronics Industry Yearbook, 2001, Shanghai, Zhejiang and Jiangsu Province, the electronic components industry output and exports reached RMB 1,318.88 billion (converted into U.S. dollars at $ 15.9 billion) and $ 4.77 billion in 2002 the growth rate of output and exports 15%, respectively reached RMB 1,516.7 billion (converted into U.S. dollars at $ 18.3 billion) and $ 5.44 billion. At present, the region of several electronic components sales and export value has a leading position in the Chinese mainland, like the IC, and optical fiber cables, electro-acoustic components, magnetic materials, transformers, switches, components of the quartz crystal micro-motors and PCB board. All of these components available to the world, especially Southeast Asia, Europe and North Americas consumer electronics products, communication products and computer products manufacturer. During this period, a growing number of large foreign electronic products manufacturers moved their production bases in mainland China, especially the Yangtze River delta, so that this powerful electronic base advantage, complete upstream and downstream industry chain, rich in human resources and preferential industrial policies. As an example, according to CCID-Suzhou Industrial Park in Jiangsu Province in the laptop computer in 2002 production reached 10 million units, becoming one of the worlds largest laptop production base. At the same time, these foreign manufacturers of electronic products most exported to foreign markets, therefore, can be predicted, a large number of export of locally manufactured electronic manufactures, such as cell phones, household appliances, computers and cars, etc., will be in the next down the ADS7846E years, become the indirect export support in the area of ??electronic components. At the same time, with China to return to the WTO, due to the reduction of import tariffs for high-end electronic components and even duty-free, intensified competition in the electronic components industry in the region. However, on the other hand, local manufacturers it is easy to cause-the-art equipment to ensure that produce high quality and superior performance of the components, you can reach the international advanced standard. In addition, the update of foreign electronic products also led to the growth of export volume in the region. Most of the electronic component manufacturers are closely followed in order to meet their high-tech requirements of foreign customers to update their products to high-end development. In the Yangtze River Delta region, the sheet components, such as chip capacitors, chip resistors, chip inductors, flaky diodes and flaky transistor is still the focus of the market. In addition, the different requirements of the automotive, communications, computer and consumer electronics products will also guide the direction of development of new products. Due to low labor costs and the ringing of the investment stimuli in the AD620ARZ environment, in order to reduce product costs, a large number of foreign electronic components manufacturer in mainland China set up their production base. Especially in the eastern part of China, foreign best first choice due to its ideal location, a strong economic base and rich human resources, most of the world famous electronic components manufacturers, such as Japans Murata the Kyocera company, Matsushita, Hitachi, Intel Corporation, National Semiconductor Corporation, Philips of the Netherlands, South Koreas Samsung, etc., have been in the region to establish a wholly-owned factory or joint ventures. All of these companies have been or will be to increase the scale of production and exports of equipment in mainland China, these manufacturers will contribute to the expansion of the exports of eastern China. As the leader in economic development in the Yangtze River Delta, Shanghai has to focus on high-end electronic components for color picture tube and deflection yoke, and has a leading position in the country. In addition, the city will in the next few years to build a complete chain of the semiconductor industry, in order to enable the city to become the new Silicon Valley of Chinas mainland. In recent years, Jiangsu Province has attracted investment from Japan and Taiwan manufacturers in this region, the two cities to attract these foreign manufacturers, that is, Suzhou and the element tin. Reed Business Information Center statistics show that, it is estimated that the amount of investment from Taiwan reached $ 17 billion in Suzhou. Among them, more than 70 projects invested more than $ 30 million, 17 projects of over one hundred million U.S. dollars. By the end of 2002, Wuxi New District has been the introduction of the 740 investment projects, total investment amounted to $ 2.74 billion, mainly concentrated in the new electronic components and battery projects. In addition, the provinces booming private sector for export growth to make a great contribution. In Zhejiang Province, the majority AD536AJH of electronic components manufacturer is export-oriented private sector, mainly in Ningbo, Wenzhou, Yueqing, Hangzhou and other places. They produce about 30 kinds of components, for example, like the flat panel display devices, discrete devices and high-frequency components has an absolute advantage in the domestic market share. Some of the private sector has a large-scale production capacity, high-tech research and development capabilities, as well as overseas market channels, so they can become strong competitors of foreign electronic components manufacturer in the domestic market. In addition, in these three areas, through coordination between the authorities and manufacturers, orderly competition, in order to maintain the advanced position, the eastern part of Chinas electronic components manufacturers will appear in a collaborative and integrated development trend. In this way, in the near future, the region will certainly be a world-class electronic components manufacturing base. In addition to a world-class manufacturing base in eastern China in the next few years trying to develop electronic components research and development base. In this region, the more foreign manufacturers have set up their research and development base, as they back-up in the local production base. As an example, the Shanghai municipal authorities in particular to encourage domestic and overseas research institutions and local businesses to set up joint research center to enhance the electronic technical level of the Yangtze River Delta region. : Magnetics Offers Network
More news about IC:
http://icboke.eklablog.com/

ARM Cortex-M3 MCU core Adds recruits, start-up company's flagship ultra-low power applications

Based on ARM Cortex-M3 processor core application is now very common, including NXP, STMicroelectronics, Texas Instruments (acquired Luminary product line) other manufacturers have already have a powerful ARM Cortex-M3 core product line family. The Cortex-M3 China has accumulated a large community of developers, in 32-bit MCU area has also been very high recognition, applications ranging from consumer, household appliances, industrial, security, medical electronics and other fields. Cortex-M3 core using the MCU manufacturers usually concerned about the following features: lower power consumption, higher computing power, lower prices, more peripherals. Recently, a start-up company from Norway Energy Micro on the main low power consumption, released a new Cortex-M3 core MCU TP3057WMX products. It is understood, Energy Micro's president and CEO Geir Forre ISM band wireless communications transceiver is a leading manufacturer of Chipcon founder, Chipcon acquisition by TI in early 2006, shortly after, Geir Forre formed Energy Micro is the company, and from the TI, Nordic and other manufacturers hired a number of technical personnel, and for mixed analog-digital low-power design has a very rich experience. According to the Energy Micro's vice president Eirik Jorgensen R & D and sales vice president Bryan Hung introduced, Energy Micro in October 2009 announced the first 32-bit Cortex-M3 core EFM32 Gecko (Gecko) microcontroller family, a series of low-power applications . Recently, the company issued a second series: EFM32 'small gecko (TG). The product price less than $ 1, but with the energy of a large gecko's comparable products, with a combination of Flash and RAM of smaller features, MAX187BCWE optional space-saving QFN20, QFN32 and QFN64 packages. Bryan said the new product is very low current consumption: In Active mode the actual code execution from Flash when the power consumption per MHz of 180?A, in deep sleep mode is 900nA, in shutdown mode is 20nA. In the application benchmark, EFM32 gecko low current microcontroller performance, coupled with the start-up time to less than 2?s battery life of at least four times. Peripherals, the "small gecko can provide low-power peripherals, including low energy, UART and I2C serial interface, A / D and D / A converter and a host of counters and timers. Gecko's unique micro-controller is that it's "peripheral reflex system (peripheral reflex system) (PRS) with a standard parallel 32-bit ARM bus. PRS EFM32 gecko can run their own peripherals and communication, while the central processor is turned off, extended sleep and save a lot of energy. Energy Micro now price of only $ 69 can provide low-cost starter kit, to facilitate local engineers to invest in developing lower cost. In the Chinese market, Energy Micro has two agents with the Cooperative Extension program, in which the main push RTI POS and security, BOCCN main push industrial market, the future Energy Micro will also seek more partners and third-party design company. Because of Chipcon's background, R & D team ADS7846E in the short-range wireless transmission also has a wealth of experience. Expect the company's next-generation products will be integrated 2.4GHz wireless modules. Currently chipcon, nordic wireless products and more integrated 8051 core, the future integration of Cortex-M3 will be a trend, including the ST and other manufacturers are planning to Cortex-M3 products coupled with the wireless module. The Cortex-M3 development in China after more than four years, has entered a mature period of growth, Energy Micro to enter the market during this period, both to avoid the ADS7809U open market as hard as Luminary, took advantage of the huge development of China's current community-based, fully use of the "S curve theory. However, as many competitors, and more for international companies, Energy Micro will face many challenges. Bryan said, the beginning of the company's product line is certainly not as good as full of large companies, but small companies with customer support the advantage of strength and response speed, low power consumption of the future will be based on expanding product lines to meet the needs of Chinese customers. Energy Micro's vice president of sales Bryan Hung

United States developed the world's smallest monitor installed in the contact lens

Despite the commercialization remains to be seen, but it is combined with virtual reality on the important step. Recently, the University of Washington scientists ????? Chavez with his research - a display function of contact lenses, held in Beijing participated in Electrical and Electronic LTC1065CSW Engineers Biomedical Circuits and Systems Conference (IEEE BioCASE 2009) . The virtual world can be superimposed on the real picture on the latest technology, is expected to give the user unprecedented wonderful experience. U.S. scientists have developed this display can be worn on the eyes, to monitor and contact lenses combine together cleverly. He built a tiny contact lens in the LED display, mobile electronic devices can be images and text directly onto the glasses to get rid of the notebook computers, mobile phones and PDA and other mobile information device limitations. Parviz hope, the device can show a large number of images in the user front 50-100 cm distance, so that the virtual world of all types of information in the real reach of the Department will be able to view at a glance. In the development process, how to use the eye-friendly materials to produce the circuit and combined it with contact lenses, as researchers face a great challenge. Good use of nano-biotechnology and nano technology manufacturing small electronic assembly equipment Parviz designed a special set of circuit elements, and creative use of capillary action to the circuit assembly, succeeded in solving this problem. The polymer used to make lenses for not STV5730A-1 withstand high temperatures and fine chemicals used in processing the case, he diameter of only 1 / 3 mm LED circuit elements such as specially designed pre-installed on the organic substrate with a biocompatible . In the contact lens surface is first made with metal wire circuit, and etching out the shape of each component compatible with the hole, and then let the liquid spread on the surface of contact lenses, and the erection of these free components placed into the liquid. In the capillary force, the components according to their shape embedded in the lens surface corresponding slot gap, completing the circuit of subtle self-assembly process. Another challenge facing scientists is how to contact lenses for micro LED power supply. Parviz originally designed in two ways: one is through installing the antenna in contact lenses, and receive radio waves to produce energy; the other is to use photovoltaic cells. After several months of research, the scientists chose the former, and success. However, Parviz still need to continue to improve the transmission of information and power, he hopes that both will be supplied by mobile phone. British "Guardian" reported in 2008, this was still in the development process of electronic circuit with a light-emitting diode (LED) of the contact lens much appreciated, that the study, if successful, will be the most minor personal monitors. The combination of reality and virtual tremendous progress in any scientific and technological progress have a cumulative process, the development of personal monitors is no exception. As early as 1968, the U.S. Defense Advanced Research Projects Agency (ARPA) Information Processing Technology Office, Ivan Sutherland at MIT's Lincoln Laboratory developed the first helmet-mounted displays - "The Damocles AD9850BRS sword. The use of cathode-ray tube mounted display for the first time a virtual extension of people's vision, the user can see superimposed on the real environment on wireframes later the technology is widely used in fighter pilot helmet and virtual reality devices. Since then, scientists have been constantly improving the display, to make it lighter, clearer images. To June 2009, the German Fraunhofer Institute for optical micro-system scientists developed the optical display. Scientists put a CMOS sensor and a tiny projector into the OLED to a very small chip, and then install the chip on the glasses. After receiving instructions, micro-OLED projected images will be projected onto the wearer's retina, allowing the wearer to see high-resolution and high-resolution images, and feel their image at a distance of one meter distance. The chip also comes with eye tracking capabilities, through tracking the wearer's AD73360LARZ eye position to determine the wearer's command, greatly enhancing the interactivity of the display. And now, Parviz nanotechnology developed to monitor worn on the eyes. The micro-display applications bright future. In the field of so-called augmented reality, that is where all the required supporting information, such as navigation arrows, building descriptions, graphics or language translation, operating instructions, can be widely applied. In this regard, New Zealand University of Canterbury expert assessment of augmented reality ????? Manchester said: "A contact lens will be the real world and virtual graphics seamlessly link up, this is a huge step forward, although this idea to achieve business technology remains to be seen, but this prototype is in this direction an important step.

China is becoming a global production base panel

China will become the world's largest production base of industrial pattern panel suspense no longer.
With the expansion of China's domestic market demand and high generation LCD panel CS4391-KS manufacturers in the field of a strong rise, panel production and shipments will increase in geometric progression. Although the chase market trends is inevitable, but also supporting the construction, human resources, risk, return on capital, industry excess capacity and other industry's MAX191ACWG concerns, however, China will become the world's largest production base of industrial pattern panel is no longer the suspense, the Chinese market for the Sumitomo Chemical Group is particularly important.
As a wholly owned subsidiary of Sumitomo Chemical's live electronic for FPD (flat panel display) industry with a major China-related products have achieved local production, and customer service are integrated to the corresponding mechanism, and various regions in China, the new plant in providing quality products at the same time, the nearest to meet customer needs. Meanwhile, as a comprehensive chemical manufacturer AD421BR Sumitomo Chemical Group full use of their strengths, developing a variety of products to market. Which provided for the FPD industry products, optical functional film can be widely used in LCD TVs, notebook computers, handheld devices, LCD projectors and other products.
In addition, the recent growing demand for IPS mode LCD, including the further development of the IPS wide viewing angle polarizing plate with a phase difference.
With opportunity comes a challenge, I believe the  SSM2164S  will be even more intense competition, supply of materials as manufacturers will also face the same challenges, only high quality products and not enough high-quality services more quickly and equally indispensable.

2009 China (Chengdu) Electronics Fair grand closing the western market hot

Professional exhibition in Chengdu, widely praised three-day "2009 China (Chengdu) Electronics Fair (CEF) and the 2009 Western Electronic Forum on China on August 29 in Chengdu New International Convention and Exhibition Center was closed as well-known brand of China Electronics Fair, first held in Chengdu, by the State Ministry of Industry and Information Technology, Chengdu, Sichuan Provincial People's Government and people of strong government support, has also been the active participation STV5730A-1 of the industry. Booth 500 sold out show last year CEF Xi'an more than 60% growth in the size of the exhibition visitors 11,593 people received three days to reach 13,109 people. warm atmosphere, can be evident by signs of economic recovery. to from Chengdu, Deyang, Mianyang and other places of visitors have come to visit, where the aerospace, industrial process control, machine manufacturing, automobile manufacturing, transportation equipment, electrical equipment, communications / network equipment and other user industries and enterprises as well as electronic machine manufacturers ( such as Sichuan Changhong, Sichuan Jiuzhou, etc.), Military Institute (such as CETC No. 10, No. 29) was invited by the organizing committee, more than 600 technical research and development, material supply, procurement and other staff to reach the exhibition site, visits, technical exchanges, product selection, purchasing the exhibition site, an exhibitor told reporters that this year's event scale, giant wrist gathered, new range, this exhibition is the first case in the West. "2009 China (Chengdu) Electronics Show by the Sichuan Provincial Information Industry Department and China Electronic Appliance Corporation and co-development of exhibition industry Chengdu Municipal Government Office, Chengdu Information Office Co, and Power Exhibition & Information Communication Co., contractor. The event opening ceremony of "2009 China Western Forum Summit Electronics, Sichuan Provincial People's Government Vice Governor Li Chengyun deliberately sent a congratulatory letter, said the successful staging of this exhibition will promote the information industry in Sichuan Province's foreign exchange and cooperation, to promote sound and rapid development of information industry in Sichuan Province play an important role the Ministry of Industry and Information Technology Policy and Regulation Department Deputy Director Guo Fuhua, Chengdu People's Government, Bai Gang, vice mayor, China Electronic Components Association Wenxue Li attended the opening ceremony and delivered speeches respectively. Sichuan Information Industry Department deputy director Xu Yang keynote speech of the "sound and rapid development of information industry in Sichuan. Wang Yue academicians to do on the "industrialization and information technology under the keynote of embedded systems through the development of electronic information technology, can promote the upgrade of China's industrialization of China Institute of Electronics, Vice Director Liu Rulin brought concern to the industry, including cloud computing, including electronic and information technology direction the Ministry of Industry and Information Technology Director of Monitoring and Coordination Bureau He Hailin Electronic Information Industry reported the economy situation, the future and boost confidence in China (Chengdu) Electronics Show will be welcome to carry out the first day to visit the climax the same time, the scene is attracting Sichuan Satellite TV, four TV stations in Sichuan, Chengdu, television set, television sets, Chengdu, Chengdu TV sets, "Huaxi Dushi Bao", "Chengdu Business Daily", "Chengdu Evening News." "Chengdu Daily", "Tianfuzaobao", Sichuan online and a number of mass media covered the story of the exhibition in the western market has unlimited potential, companies eager to show not only attracted new exhibition has just settled in Sichuan, IBM, Intel, Agilent and other international machine and components, equipment giant, and Tektronix, LeCroy United States, the United States Fluke, Germany Rosenberg, Rohde & Schwarz, ESPEC also have exhibitors and other industry giants, and bring advanced electronic technology. semiconductors, components and leading manufacturer Tyco International, Visa International, Murata, Avnet, Taiyo Yuden, Fairchild Semiconductor, Texas Instruments, ALTERA, Actel, Xilinx, Microchip Technology, ADI CEF, also have tested the water exhibition in Chengdu, the western market in the future will usher in more international giants join. domestic exhibitors to be outdone, the scale of 80% or more exhibitors, including Sichuan Province Outstanding Enterprises: Global China in the Division, Quanzhou torch, Changzhou Jianli, Changzhou DS1210S Galaxy, with the benefit Changzhou, Ningbo, Chen Xiang, Ningbo is high, creating four new Beijing, Guangzhou, Saul, Taiwan, Holy Stone, Mellon, Shenzhen, Chongqing Sida, Zhejiang monarchical power, Xiamen Yinhua , Ju Fu instruments, Wah Luen Electronic Tools, etc. In the future, these companies will probably become the electronic information industry chain in Sichuan on the important part. Holy Stone of independent R & D Ceramic chip capacitors, and more rare in the industry's large size , high pressure, customized products, this show is its superior products ceramic high voltage capacitors is a long established electronic connector manufacturer, the production of anti-leak, water and micro-rectangular connectors on both the technical and craft belong to the advanced level, the display of products, including MF Series ring counter anti-leakage power connector socket, SFX series of circular connectors and other underwater. "Our philosophy is to allow customers to easily choose the same driver as the selection of our products , the products be standardized to provide customers with integrated solutions. Shenzhen axis of self-control booth official explained that the image of their products. The main product they bring AS series cabinet is a robot. Sichuan local electronics company is also a major highlight of the show, including prominent representatives: Sichuan Liyuan, Sichuan Yongxing, Xuguang technology, four Chuandan Fu, Xincheng CRE, Chengdu Ming Wei, Chengdu-day Austria, Chengdu Namgyal, four-chon Jia, Xing-de Chengdu, Sichuan Dongsheng, Chengdu, Wei Peng, Chengdu, Matt, into Are Putian, etc., they are the backbone of the electronic information industry in Sichuan. During the show, China Aviation Optical Marketing Miss Du Yan, vice minister in an interview with reporters, he stated: China Aviation Optical has been involved in CEF in Shenzhen, Shanghai, exhibition, exhibition in Xian last year, just over a tour of all of this year after , obviously feeling the large number of site visits; this professional team in the western exhibitions can be said to be the most successful one.
Electronic forum for the same period in western China to lead the development of the industry, "the integration of two main line runs through the show. For industrial, military grade electronics market, CEF Chengdu Exhibition year launched the" 2009 China Western Forum Summit and a series of electronic forums and high-end technology seminars, 21 sessions a total of 17 topics. The first day of the exhibition, 2009 China Western Forum Summit Electronics around the "electronic and information technology help to upgrade the western industrial themes. Ministry of Industry and Information Technology, General Armament Department of the relevant electronic information-based leaders, academicians, and the Provincial Information Industry Department, Chengdu the leading participants, industries and enterprises Autodesk, Intel, IBM, Avnet and other leaders and participants, the audience focused on the electronic and information technology and advanced manufacturing technology, modern management techniques and methods of the law and actively promote the "integration of the two to promote industrial ADM3202ARNZ upgrading and city information. Other topics related to carrying out three days also include information the city, military electronics procurement, test and measurement studies and surveys, network information security, magnetic sector development and investment, industrial electronics design, circuit protection and electromagnetic compatibility, power devices and power modules, power management and energy conservation, connector technology, FPGA industry, small electronics intelligent design, SMT and electronics manufacturing. 27th meeting of EDN China Forum focusing on how the industrial electronics industrial electronics products to meet performance, reliability, cost, time to market needs, FPGA and high-performance analog products along two main lines to start. Three FPGA vendor Xilinx, Altera, Actel scene together, introduce different emphasis; TI, ADI, Maxim for the audience demonstrated high performance, high reliability electronic analog IC designs in industrial applications; Tektronix Technology, Farnell, LeCroy also involved in the United States and make a speech. Forum attracted nearly 200 participants attended enthusiastic audience. In the afternoon, electronic components Technology Network (www.cntronics.com) forum summit, organized under the western half of the electron, from the Institute of REF198ESZ Chengdu and the surrounding industrial, communications, corporate purchasing managers, senior executives and internationally recognized electronic component supply providers gathered together to explore the western electronics market needs and trends. The world's largest distributor Avnet brings a wonderful international distribution trends lecture; Shanghai Feng Bao electronic depth on how to build the core technology competitiveness issues shared insights; Miller Electric welding the innovative tools and technology trends lecture, so the welding tool in western engineers have a new understanding; focus on the application of power in the field of CLP China Shenzhen Star analyzed the distribution of professional and technical services market. 74th China Electronics Fair: to promote the industrialization of information technology, electronics technology for industrial upgrading, November 11-13, the next China Electronics Fair (CEF) will continue at the Shanghai New International Expo Center, the exhibition will focus on "information technology to promote industrialization , electronic technology and promote industrial upgrading as the theme. "integration of two strategies, through electronic and information technology upgrade to promote industrialization, for the traditional industrial enterprises to make is the need to develop advanced manufacturing industry, companies can not only improve the old product structure, but also bring unlimited electronic design space. Currently as industrial control, security, testing, medical equipment, automotive, aerospace and military electronics equipment and other new applications emerging markets, suppliers are rapidly driving high-margin business. For advanced manufacturing of industrial electronics market, the exhibition site will open high-end components, optoelectronics, semiconductors, instruments, tools, power batteries, transformers, equipment, 3D stereoscopic video, virtual simulation, and automotive electronics and other hot products area. Exhibition period will be in Shanghai to build a new round of "2009 China Electronics Forum, in order to field more than ten hot spots involved in the industry forums and seminars for the surround, contain components leading vendors Forum, the ICT industry in 2010 forecast the economy & market seminars on business opportunities , 3D stereoscopic video, integrated circuit testing, green manufacturing, circuit protection and electromagnetic compatibility, capacitance selection, automotive electronics, embedded technology, WLAN wireless local area network, etc. This is an industrial integration and the promotion of the event. Please attention: http://www.ic2world.com/